We upgraded our old TV from 51 inches to 55 inches, and we decided to use these 51-inch TVs as Anthem Advertising. They are using YoDeck digital signage software, which is helpful for us because we don’t have to spend too much money on device’s software. We now have 25 YoDeck all our Anthem Stores.
Gallery:
Today, I turned off the DNS port 53. Since we have been cutting off our store’s DNS server, it has been a DNS amplification attack. So I found out that my Router does have a DNS Proxy, My DNS Server does have HTTP over TLS and DNS-over-HTTPS. Everything is working and attacking is currently stopped after I set up 853 port encryptions and disable Plain DNS. I also want to keep my stores safe.
My router has a DNS Proxy option, so I added my DNS IP Server,
Then I have gone to Wired Networks → LAN, then go to Admin
If you change DNS Server to your DNS, please change to Auto So DNS Proxy to do the job.
Now we have an encrypted DNS over TLS.
This all-in-one computer was used to run a server for DNS and a network controller within my budget-conscious plans. It crashed due to overheating, so we replaced the proper tower server this time. But I’m not throwing away this computer because I can fix it. 💻🔧 #TechFixer #BudgetFriendlyComputers
Now I have decided to use All in one for my work office, then a laptop for emergency at work. So much better 😎💻 #WorkLifeBalance #TechSavvy
Download Intel Rapid Storage Technology (IRST) drivers from the HP Software and Drivers webpage and extract them to the USB flash drive.
Load the missing storage driver, and then install Windows 10.
Continue through the installation procedure until the installation is complete.
Indeed, it was the correct decision. Comcast Business has recently upgraded our plans to 250 MBPS, automatically upgrading with download speeds reaching 500 MBPS and upload speeds at 200 MBPS. I have decided to relocate my server from medical to another location that offers the highest upload speeds and is ideal for smooth operation.
Subsequently, I have established a website at https://status.richardapplegate.io for my work status uptime. It is crucial to me to monitor their performance constantly. I also monitor our comcast business gateway. Great to document their outrage from time to time to provide us credit.
All of my data is on folder drive mounts that where our data is to make backup and restore operations easier. Stopping your stack with docker-compose down will allow you to back up all the files and subfolders in the folder next to the docker-compose.yml file.
For example, if you want to create a ZIP archive, you can use the following command:
zip -r myarchive.zip .
To restore from a ZIP archive, please unzip the archive into the original folder using the following command.
unzip myarchive.zip -d /path/to/original/folder
Once your backup has been completed, you can start your stack again with the following command:
docker-compose up -d
This is all. With these simple steps, you can easily backup and restore your data volumes with Docker Compose.
Log in to your Comcast Business Account.
https://business.comcast.com/connectivity/internetdashboard/
After you log in, go to the correct location to update your internet. Scrolling down to Subscribed Services ⇾ SecuirtyEdge.
After you click that SecuirtyEdge(https://securityedge.comcast.com/#home)
You can go over to the Block and Allow list.
Place your website into the Check URL text box and then click Check.
Make sure that you click allow, so we can access your site from your stores or office.
After you publish and save, it will take about 30 min for your store’s or office’s modem to update, and then it will unblock/SSL invalid won’t show that anymore.
If you still face the issue, I am happy to swing by and work that out for you to get it to success on the website for every customer view..
On Sept 2023, I established this network, and unfortunately, it experienced the most severe condition of overheating due to the presence of grease. I upgraded it to a cabinet in October 2023, and it is currently functioning flawlessly. All the devices are fan less, resulting in a reduction in dust and grease buildup. 🙂
I sincerely appreciate Lady Bonnie’s permission to undertake a DIY project at her residence. Furthermore, I utilized my Xfinity modem in her living room, which was a part of my plan account. I did not use her internet account. I made a cable for her camera that went through a hole in her living room. She permitted me to insert a line there. A Gigabit Wireless Bridge was installed on her existing pole, which was used as an antenna TV cable. That is the perfect spot for a perfect signal strength. It’s better than Xfinity Pods because my RV pole is hooked up. I am searching for a perfect spot and speed. Here is my project.
I could make this RV park get Wi-Fi service instead of paying a lot of money on the Xfinity bill. I’d love to work on a project for your business. One will be located in an office, headquarter, or shed where the internet is located. If the place has COAX or Fiber, but it’s too far away and doesn’t work well, and you don’t get what you paid for. You have lost at least 60 – 90 percent of your speed with the extender, and you are still unable to upload YouTube or my server. Then, it’s suggested to mount the pole on the roof with the gigabit wireless bridge and adjust the angle of the access point to match your RV, mobile home, or business.
Coffee stands are an example. If you don’t have coax wall or cable to use service Internet, we can do wireless bridge. If you have internet from another store, we can ask the office lease for permission to add a Gigabit Wireless Bridge to the building roof. You own a residence or business, I can do install that for you. One cable 100–150 feet to your office or living room to hook up your router is all you need. Unless you change network information on your router, it is a plug and play device.
