Richard Applegate

Tag: WiFi

  • I found a cool way to connect MiFi Hotspot to our Router with the Tablet.

    Sorry about Dusty from the Government Cabinet Network. We can’t use them for our business, so we have to use a hotspot solution. Now that I have a tablet, I connect it to a Type C hub using Ethernet. Then, my tablet connects to the WAN port on the router. Then I went to tablet settings and turned on tethering. Now our Router will get Internet via tablet. The hotspot MiFi only sees one device because my router is doing the job for us. So cool project to figure out. I couldn’t use the Wi-Fi extender, it won’t work… If the tablet goes off and is not used for a while, it will turn off the tether. I found another solution, I went to Developer Mode in Tablet Settings and turned on Stay awake when power charge then brightness dark all the way to save battery life spans.

  • So exciting, We’re going to Garyland, WA to work on an outdoor wireless bridge For internet 🙌 Breakwater

    Goal to set up

    Blue Dot: Starlink connected to ubiquiti dream station, that we want

    Green Dot: Xfinity connected to ubiquiti dream station.

    We want to discontinue Comcast’s service at Green Dot so that Blue Dot can provide internet to Green Dot instead. He is considering setting up a wireless bridge between the two rooftops, but he needs my assistance to establish a connection from Blue Dot’s Ubiquiti (connected via Starlink) to Green Dot’s Ubiquiti. This would allow him to cancel the Xfinity plans.

    I successfully installed new wiring, which required me to access the attic for the first time. The project involved drilling to run two Cat6 cables for a client’s access point and a NanoBeam 5AC Gen 2 in a cottage house. Altogether, I installed ten Cat6 cables to support both the cottage and the hotel laundry building.

    I have successfully reached the owner and assured him that it is safe to cancel his Comcast Business service. He can now transition to Starlink and take advantage of their new advanced protocols.

    Laundry Hotel, i did install it there and set It up as Main Internet, then cottage i did set AP bridge, and now it is working
    Added 2 new wires for NBE-5AC-Gen2 and UAP-AC-LTE
    That is where I plan to put Mount AP on there.
    NanoBeam 5AC Gen 2
    Cottage house (client router)
    Zip tie all blue cable and power. Yellow cat 5e already removed. So it all nice and clean.

    100 download and 100 upload good speed between Hotel to cottages.
    . 2 miles away not bad
    Hotel wifi access point to cottage house